Provide a branch on the supply side of the exhaust cleaner to
mount a valve and a pressure gauge.
? During inspection, open the valve and check the pressure at
the time of exhaust discharge.
(The valve must remain closed except for inspection. The
pressure gauge could break if the valve remains open.)
consumption of the actuators that operate simultaneously. Also add the
capacity of the piping from the cylinder to the EXH.
2. Select a model that provides a maximum processing flow volume that
exceeds the consumption volume obtained in step 1
How to read the graph: If the AMC510 is operated at a flow volume of
1000 l/min (ANR), the inlet pressure will be 0.05 MPa
Note 1) On the type for the AMC220, an R 1/4 fitting
can be attached by removing the drain cock.
(It becomes the drain piping type.)
Note 2) Select the threads to match the threads
on the product itself.
Select a model according to the air consumption of the circuit to be used.
1. Obtain the air consumption of the actuator to be used. However, if an
exhaust cleaner of the centralized piping type will be used, sum the air