At each of the maximum pressure values it provides a GE and
Operating mode, optimized at these maximum noise reduction.
1) only for C5, D5 and W controllers (optional)
And has a very high repetition accuracy with a low voltage peak during the fall control.
The noise optimization achieved by adjusting the height adjustment screw provides low operating noise.
Fluid powered lubricated plain bearings ensure long life cycle.
Thanks to its specific design,
PV7-type vane pump with adjustable displacement, with low flow pulsation,
Pump set to customer:
When ordering the required settings
The axial compensation of the displacer provides the best volumetric efficiency.
Please specify the desired setting (eg qVmax = 20 l / min; pzero stroke = 70 bar) in order on the order.
Then set the pump to the desired value and optimize the operating noise accordingly.
Without express instructions,
the flow and zero stroke pressure will be set to the relevant
maximum and the operating noise will be optimized for these maximum values.
(Eg qVmax = 20 l / min; pNullhub = 70 bar). The
Then pump the pump to the desired value and
Operation mode, noise reduction ENT method corresponding optimization.
If there is no clear text is Wulu I flow and zero trip