3 faces on ?12, ?16, and all 4 faces
including port side on ?20, ?25.
ensure that it should not exceed the
allowable lateral load to the rod end as
2 way basic mounting:
Through-hole or both ends
Basic mounting is 2 way. You can
choose either through-hole or both
ends tapped mounting.
torque from being applied to the non-rotating
Cross-section of a cylinder tube is the same
Hexagonal cross sectional shape piston
rod for high non-rotation accuracy.
?12, ?16 — ±1°
When installing a cylinder, centering
should be required accurately.
Adoption of guide mechanism is strongly
recommended for the case when CQS is
used as stopper to prevent non-rotating
piston rod from side loads.
2. When a workpiece is secured to the end
of the piston rod, ensure that the piston
rod is retracted entirely, and place a
wrench on the portion of the rod
that protrudes beyond the section. Also, tighten by
?20, ?25 — ±0.7
All loads to piston rod must be applied in
axial direction only.
When a lateral load is applied unavoidably,
configuration regardless of w/ switch or w/o switch.
Auto switch mounting allows
for flexible designing
Ideal for machine designs with small
The “D-M9” auto switch will not protrude from
switch mounting groove.
Square body shape gives you flexibility
for designing machine.
specified in graph (1) to (5).
giving consideration to prevent the tightening